.png)
Advance ZincTek is Australia’s Largest Supplier of Cosmetic and Pharmaceutical Grade Zinc Oxide Powder Used in Sunscreens and Personal Care Products
ZinClear Zinc Oxide —
India Enquiries
ZinClear is available in India through United Descaler and Connell Caldic.
ZinClear is a pharmaceutical-grade, non-nano zinc oxide manufactured in Australia by Advance ZincTek (ANO). Operating since 1997 and supplying 25+ distributors across 40+ countries, ANO is one of the most established mineral UV filter manufacturers in the world. As India's sunscreen market expands rapidly, driven by rising awareness of UV damage, a growing shift toward mineral alternatives to chemical filters, and increasing demand for export-ready formulations, ZinClear is trusted by formulators across the country for its transparency, broad-spectrum performance, and non-whitening aesthetics.
ZinClear is distributed in India by two authorised regional partners. Submit an enquiry using the relevant form below to connect with the right team for your location.
WHY ZINCLEAR
ZinClear delivers broad-spectrum UVA, UVB, UVC, and Blue light protection using uncoated, non-nano zinc oxide, with no chemical UV filters, no coatings, and no nanoparticles. It is photostable, non-phototoxic, and antimicrobial, making it suitable for preservative-free formulations.
ZinClear's Internal Microstructure (IM) particle technology gives the zinc oxide particles a closer refractive index match to carrier oils, producing a significantly more transparent finish than conventional zinc oxide dispersions and reducing white cast on skin.
As a physical UV filter, ZinClear reflects and scatters UV radiation rather than absorbing it. Because particles are non-nano, they remain on the skin surface and do not penetrate the viable epidermis, making ZinClear suitable for baby care, sensitive skin, and daily facial wear.
In independent in vivo testing to ISO 24444, SPF 50 is achievable at just 25% ZnO concentration.
ZinClear is FDA listed, TGA-licensed, ECOCERT COSMOS approved, Halal certified, and compliant with Indian cosmetics regulatory requirements under the Drugs and Cosmetics Act. Manufactured in Queensland, Australia under GMP conditions.
PRODUCT RANGE
ZinClear XP — Powder
ZinClear XP is a pharmaceutical-grade, uncoated non-nano zinc oxide powder with a purity of ≥ 98% ZnO and a particle size of 200–700nm. It is produced using Antaria's patented Mechano-Chemical Processing (MCP) route, which delivers particle size and surface area consistency that conventional zinc oxide manufacturing cannot match. Conventional zinc oxide typically has a surface area bandwidth of 15–35 m²/g between batches. ZinClear XP's bandwidth is approximately 10 m²/g per grade, meaning formulators get repeatable SPF curves and predictable performance across every production run.
The powder is available in 5 BET surface area grades spanning 15–44 m²/g, allowing formulators to select the right grade for their SPF target and application type. Lower BET grades suit daily moisturisers and light-wear SPF products; higher BET grades are specified for dedicated high-SPF sunscreens and baby care. Suited to facilities with in-house high-shear dispersion capability.
ZinClear Dispersions — Ready to Use
Pre-dispersed in carrier oil for direct incorporation into formulations. Each dispersion uses ZinClear XP as the active ingredient, delivering the same UV performance and regulatory credentials in a ready-to-use format suited to facilities without specialist high-shear mixing equipment.
-
ZinClear IM50 AB: 50% ZnO in C12-15 Alkyl Benzoate. High SPF formulations with non-whitening aesthetics; dry, silky skin feel. Suitable for tinted formulations developed for deeper skin tones.
-
ZinClear IM50 CCT: 50% ZnO in Caprylic/Capric Triglyceride. Lightweight, fast-absorbing, non-comedogenic. Widely used across SPF products, tinted moisturisers, and daily wear formulations.
-
ZinClear IM50 JJ: 50% ZnO in Jojoba Oil. Non-comedogenic, long shelf life, suitable for sensitive skin formulations.
-
ZinClear XP65 COCO: 65% ZnO in Coco-Caprylate/Caprate. High-concentration dispersion; high SPF performance with less ZnO per formula. Organic and COSMOS-certified formulation compatible.
All IM-grade dispersions use ZinClear's Internal Microstructure particle technology for improved transparency and reduced white cast on skin.
Full technical documentation including TDS, CoA, MSDS, and formulation guides is available at advancezinctek.info.
CERTIFICATIONS AND COMPLIANCE
TGA-licensed · GMP-manufactured · FDA listed · ECOCERT COSMOS approved · Halal certified · ISO 9001:2015 · VegeCert certified · Reef-safe · Compliant with Hawaii Act 104 · EU and AU regulatory compliant · Compliant with Indian Drugs and Cosmetics Act requirements
Manufacturing capacity: 5,000 tonnes per annum. Shelf life: 5 years.
ENQUIRE ABOUT ZINCLEAR IN INDIA
ZinClear is available through two authorised regional distributors in India. Please use the form for the distributor that covers your region.
North India — United Descaler
United Descaler is the authorised ZinClear partner for North India, based in New Delhi. Submit an enquiry below for samples, pricing, or technical support.
South India — Connell Caldic
Connell Caldic is the authorised ZinClear partner for national coverage across India, headquartered in Mumbai with warehouses in Mumbai, Haryana, and Chennai. Submit an enquiry below for samples, pricing, or technical support.
